Toyota 81550-0T010
Tail Lamp Assembly, Passenger Side

The first step for servicing Back Up Light repair demands complete disassembly of rear combination light components. Start by rotating the tail and stop light bulb assembly along with its rear combination light socket and wire according to the provided arrow direction until you can separate them as a single unit. Then disconnect the bulb from the socket and wire. When servicing the rear turn signal you must turn the bulb along with its socket and wire as marked in the instructions before extracting them together then taking out the bulb from the assembly header. The procedure to remove the rear bumper upper retainer includes securing the 2 screws followed by guide disengagement before you remove the retainer.