Toyota 75331-0T010
Emblem

You start the installation of new name plates and emblems by heating the vehicle body together with name plates and emblems under a heat light but avoid overheating them. Placing the No. 1 back door emblem requires using its guide and two claws with diligence toward vehicle body protection. Clean the surface of the No. 2 back door name plate by heating it until it becomes ready for new double-sided tape application and cleaning all remaining adhesive residue with cleaner. To use a name plate again you should apply heat to it first while removing existing double-sided tape then wipe off the residue before applying fresh tape and installing. Completely heat both the vehicle body surface and the No. 2 back door name plate before removing the release paper and installing it with care for foreign material avoidance. Repetition of the same cleaning process takes place for the No. 3 back door name plate before the vehicle body heating step alongside the new name plate preparation process. A proper cleaning of the vehicle's body surface must be completed before heating the base and removing tape followed by a final residue cleaning step. The process includes heating the emblem if it is reused followed by tape removal and cleaning before adding new tape for heating both the hood and emblem before installation while maintaining exposure to foreign substances.

Apply protective tape around the hood emblem, then use a moulding remover to peel off the double-sided tape, taking care not to damage the emblem or the vehicle body if reusing it.