OEM Toyota part with Part Number 47830-42080 Caliper Assembly, Passenger Side known as Toyota Brake Caliper component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 47830-42080 Caliper Assembly, Passenger Side enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2012-2018 Toyota RAV4 and 2023 Toyota Prius and 2023 Toyota Prius Prime as well as 2023 Toyota Prius AWD-e.
Genuine Toyota offers this high-quality Cylinder Assembly, Rear Disc Brake; Disc Brake Caliper, Rear Right; Disc Brake Kit, Rear Right under manufacturer part number 47830-42080 for use in the Passenger Side. This product identification code consists of 47730B which proves its manufacturer as Toyota. This component weighs 5.60 Pounds. This component 4783042080 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. This product is also known as Caliper; Cylinder Assembly, Rear Disc Brake, Passenger Side; Brake Caliper but could replace 47830-42062. Each vehicle requires the component which has an identified SKU of 47830-42080. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 47830-42080. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
In the braking system, the Toyota part 47830-42080 Caliper Assembly, Passenger Side holds a vital position, ensuring maximum performance and safety. Should fluid leaks signal a service intervention, one should opt to swap the calipers instead of carrying out an overhaul, since replacement units-both new and factory-rebuilt-are readily obtainable. To ensure effective maintenance, calipers must always be installed in matching pairs to achieve balanced braking. The removal procedure commences by partly loosening the front wheel lug nuts and safely lifting the vehicle at rest with jack stands, then proceeds to remove the wheel. When removing the caliper merely for access to another component, it is vital not to unhook the brake hose. Once the brake hose has been unplugged and sealed to avert contamination, the caliper mounting bolts may be removed. When reinstalling, retrace the removal sequence carefully and replace the brake hose-to-caliper washers with fresh, new units. Before reintroducing the vehicle to service, the brake circuit must first be bled and inspected for leaks after installation. The Toyota part 47830-42080 Caliper Assembly, Passenger Side is produced to rigid quality-control guidelines, guaranteeing an exact fit and a long, trouble-free life. On our site, you'll find an extensive array of authentic Toyota parts, each bearing the corresponding 47830-42080, each one covered by a manufacturer's warranty and a no-hassle return policy that guarantees customer satisfaction for every purchase.