OEM Toyota part with Part Number 47750-42091 Caliper Assembly, Driver Side known as Toyota Brake Caliper component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 47750-42091 Caliper Assembly, Driver Side enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2006-2018 Toyota RAV4 and 2017-2018 Toyota Corolla iM and 2016-2020 Toyota Mirai.
Genuine Toyota offers this high-quality Cylinder Assembly, Disc; Disc Brake Caliper, Front Left; Disc Brake Kit, Front Left under manufacturer part number 47750-42091 for use in the Driver Side. This product identification code consists of 47750 which proves its manufacturer as Toyota. This component features dimensions of 9.7 x 7.4 x 5.4 inches and weighs 3.80 Pounds. This component 4775042091 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. This product is also known as Caliper; Cylinder Assembly, Disc Brake, Driver Side; Brake Caliper but could replace 47750-42090. Each vehicle requires the component which has an identified SKU of 47750-42091. Additional notes include THIRD SEAT-WITH(2PERSONS). The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 47750-42091. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
In the braking system, the Toyota part 47750-42091 Caliper Assembly, Driver Side holds a vital position, ensuring maximum performance and safety. Should fluid leaks signal a service intervention, one should opt to swap the calipers instead of carrying out an overhaul, since replacement units-both new and factory-rebuilt-are readily obtainable. To ensure effective maintenance, calipers must always be installed in matching pairs to achieve balanced braking. The removal procedure commences by partly loosening the front wheel lug nuts and safely lifting the vehicle at rest with jack stands, then proceeds to remove the wheel. When removing the caliper merely for access to another component, it is vital not to unhook the brake hose. Once the brake hose has been unplugged and sealed to avert contamination, the caliper mounting bolts may be removed. When reinstalling, retrace the removal sequence carefully and replace the brake hose-to-caliper washers with fresh, new units. Before reintroducing the vehicle to service, the brake circuit must first be bled and inspected for leaks after installation. The Toyota part 47750-42091 Caliper Assembly, Driver Side is produced to rigid quality-control guidelines, guaranteeing an exact fit and a long, trouble-free life. On our site, you'll find an extensive array of authentic Toyota parts, each bearing the corresponding 47750-42091, each one covered by a manufacturer's warranty and a no-hassle return policy that guarantees customer satisfaction for every purchase.