Toyota 73130-04040-B0
Lap Belt, Passenger Side

Seat belt system inspection together with repair work stands as a necessity after a collision takes place. Replace the entire seat belt assembly even in case of no apparent damage when severe impacts occur. The outer belt together with inner belt should be replaced alongside bolts, nuts and sill-bar. You need to use the correct method both for seat belt pretensioner removal and installation steps. The diagnostic system check and visual inspection of the front seat outer belt area should be done if the pretensioner fails to activate. Regular cab and Extra cab owners should check the quarter trim for cuts and cracks and marked discoloration and the quarter panel for deformation. Numerous inspections must check the center pillar and quarter trim for Double cab models together with wire harness and connectors. Perform another diagnostic check and visual examination on the quarter panel of Regular cab and Extra cab models while checking the wire harness and connectors when the pretensioner activates. Double cab models require examination of the center pillar instead. The seat belt pretensioner needs replacement whenever it activates during an accident or during troubleshooting or in cases where the front seat outer belt shows faults or if the seat belt drops. The replacement of seat belt pretensioner becomes necessary whenever it is activated or found to be faulty or when customers have replaced or dropped their front seat outer belt. You must properly execute all required procedures when uninstalling and installing the seat belt pretensioner.

On the center pillar and quarter trim.