Toyota 73230-02020-C0
Buckle, Black, Passenger Side BLK

The inspection of seat belts along with their subsequent repairs becomes crucial after any collision occurs. Replace the entire seat belt assembly together with its outer belt, inner belt, bolts and nuts when any impact reaches a severe level even if the assembly shows no visible damage. The pretensioner status should be the initial test point using both diagnostic system checks and visual examinations when front seat outer belts are removed. The center pillar lower garnish should be checked for cuts, cracks and marked discoloration and the wire harness and connectors should be examined for damage as well as the center pillar for any possible deformation. The pretensioner activation requires performing a diagnostic system check followed by visual center pillar deformation assessment together with connector and wire harness damage inspection. The replacement of seat belt pretensioners must be done when these components show activation signature or when debugging reveals a malfunction in pretensioners or when front seat outer belts present a problem or became detached. The correct procedure must be followed for seat belt pretensioner removal together with the installation steps.

Perform a diagnostic system check and visually inspect the center pillar lower garnish for cuts, cracks, or marked discoloration, as well as the wire harness for cuts, cracks, and chipping in connectors, and check for deformation of the center pillar.