Toyota 62170-52010
Inflator Curtain, Passenger Side

Inspect the curtain shield Air Bag assembly that is already installed in the vehicle through visual examination after a collision performed on non-impacted cars to search for damage to the front pillar garnish and roof headlining assembly between the curtain shield Air Bag assembly. After a collision that did not activate the Air Bag the technician should diagnose all systems while the curtain shield Air Bag assembly is removed from the vehicle to check for damage such as cuts, minute cracks and marked discoloration of the curtain shield Air Bag assembly and attention should be paid to any connector damage.

Surface inspection of the curtain shield Air Bag assembly becomes necessary following any collision. The diagnostic system check must start on undamaged vehicles before inspecting the curtain shield Air Bag installed in its position. Findings of cuts or marked discoloration or minute cracks on the front pillar garnish or roof headlining near the curtain shield Air Bag require the replacement of both components with new parts. Before any inspection of the curtain shield Air Bag check both the diagnostic system's functions and remove the Air Bag for visual assessment. Any detected defects including cuts or minute cracks or marked discoloration on the curtain shield Air Bag together with damaged connectors warrant the replacement of the Air Bag unit with a new model. Perform every procedure exactly as designed when replacing or installing the curtain shield Air Bag assembly.

Disconnect the cable from the negative battery terminal and wait at least 90 seconds to prevent airbag and seat belt pretensioner activation.

Perform a diagnostic system check and a visual inspection with the instrument panel passenger airbag assembly removed, checking for cuts, minute cracks, or marked discoloration on the assembly, as well as any cracks or damage in the wire harness or connector, and deformation or cracks on the instrument panel and its reinforcement.

Perform a diagnostic system check and a visual inspection with the instrument panel passenger airbag assembly removed, checking for cuts, minute cracks, or marked discoloration on the assembly, as well as any cracks or damage in the wire harness or connector, and deformation or cracks on the instrument panel and instrument panel reinforcement.