How to Install the Fuel Level Sensor on Toyota Yaris?

Installing the 1NZ-FE fuel system fuel level sensor gauge assembly for the hatchback requires two steps: attaching the gauge to both the fuel suction with pump and gauge tube followed by connecting its connector. Install the fuel suction with pump and gauge tube assembly after which you can add the fuel pump gauge retainer. The system includes attaching the fuel tank vent hose sub-assembly to the fuel tank main tube sub-assembly. The service hole cover goes on first while the installation of rear seats for 60/40 split type requires the No. 2 and No. 1 rear seat leg covers. The installation sequence involves putting on the deck floor box and deck board sub-assembly of the 60/40 split seat type and then installing the package tray trim panel assembly. For hold down seat type installations insert the rear seat cushion cover pad. Complete the procedure by tightening the cable at the negative battery terminal with 5.4 Nm of torque while verifying no fuel leaks exist.

OEM Toyota Yaris Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
Toyota Yaris Fuel Gauge Sending Unit
Part Number: 83320-52261
$97.63 MSRP: $137.05
You Save: $39.42 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Tank Sending Unit; Pump Module; Level Sensor; Fuel Sender Unit
- Replaces: 83320-52180, 83320-52181, 83320-52260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2018 Toyota Yaris | Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
Toyota Yaris Fuel Gauge Sending Unit
Part Number: 83320-WB001
$28.92 MSRP: $40.25
You Save: $11.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Pump Module; Level Sensor; Sending Unit; Level Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | L, LE, XLE | 4 Cyl 1.5 L GAS

Toyota Yaris Fuel Level Sensor

Choose genuine Fuel Level Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Level Sensor for your Toyota Yaris? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Yaris parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Being an important device, Toyota Yaris Fuel Level Sensor is responsible for measurements of the fuel levels in the tanks to inform the driver on required re-fueling. This is an electronic device that performs well in conditions of high temperature as well as being designed for low power usage and being simple to bring to calibration. Mainly installed in the fuel tank the common parts of the fuel level sensor include the float, actuating rod as well as the resistor that assists in sending accurate fuel level information to the fuel gauge. Fuel level sensor should be properly functioning as it provides correct values for the fuel gauge; it is most annoying to see the "full" light after refueling. In case of some fixing problems, it is preferable to consult professional service or, at least, to have adequate knowledge of how the sensor works.

Toyota Yaris Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
83320-52261
Q: How to Install the Fuel Level Sensor on Toyota Yaris?
A:
Installing the 1NZ-FE fuel system fuel level sensor gauge assembly for the hatchback requires two steps: attaching the gauge to both the fuel suction with pump and gauge tube followed by connecting its connector. Install the fuel suction with pump and gauge tube assembly after which you can add the fuel pump gauge retainer. The system includes attaching the fuel tank vent hose sub-assembly to the fuel tank main tube sub-assembly. The service hole cover goes on first while the installation of rear seats for 60/40 split type requires the No. 2 and No. 1 rear seat leg covers. The installation sequence involves putting on the deck floor box and deck board sub-assembly of the 60/40 split seat type and then installing the package tray trim panel assembly. For hold down seat type installations insert the rear seat cushion cover pad. Complete the procedure by tightening the cable at the negative battery terminal with 5.4 Nm of torque while verifying no fuel leaks exist.