How to install the Mass Air Flow Sensor on Toyota Sequoia?

Install the mass air flow sensor onto the 2UZ-FE engine control by fastening it with 2 screws that require a torque of 1.7 Nm (17 kgf-cm, 15 in-lbf). Install the mass air flow sensor connector as the second step.

How to effectively service and repair the Mass Air Flow Sensor on Toyota Sequoia?

Service and repair of the Mass Air Flow (MAF) sensor should start with disconnecting the MAF sensor connector. First disconnect the MAF sensor connector followed by removing the MAF sensor through its 2 securing screws. Insert the MAF sensor after reinstalling it with its two mounting screws. Service and repair of the MAF sensor requires replacing the MAF sensor connector.

OEM Toyota Sequoia Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mass Air Flow Sensors found

View related parts
Toyota Sequoia Mass Air Flow Sensor
Part Number: 22204-0F030
$118.19 MSRP: $167.31
You Save: $49.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Sub-Assembly, Intake Air Flow; MAF Sensor; Air Mass Sensor; Meter
- Replaces: 22204-75030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Mass Air Flow Sensor
Part Number: 22204-0F010
$133.23 MSRP: $188.60
You Save: $55.37 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Sub-Assembly, Intake Air Flow; MAF Sensor; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Mass Air Flow Sensor
Part Number: 22204-24010
$206.78 MSRP: $295.23
You Save: $88.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Sub-Assembly, Intake Air Flow; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)

Toyota Sequoia Mass Air Flow Sensor

Choose genuine Mass Air Flow Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Mass Air Flow Sensor for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

In Toyota Sequoia automobiles, the Mass Air Flow Sensor (MAF) is an important component since it is responsible for the optimal performance of the engine by calculating the flow of air aching the engine. This information is communicated to the Powertrain Control Module (PCM), thereby helping in changing the fuel injector timing so as to ensure an optimized air-fuel mixture for combustion. Sequoia models use different types of Mass Air Flow Sensor such as the Vane Meters (VAF) and Hot Wire sensors. The VAF sensor calculates the airflow with the aid of a spring-loaded vane but the following problems tend to manifest, restricted airflow, mechanical wear. The Hot Wire sensor gives higher accuracy by measuring changes in current of a heated wire that is in open airflow though its accuracy can be influenced by contaminants. Caring for the MAF sensor is very important so as not to have problems, such as stalling or incorrect air-fuel ratios.

Toyota Sequoia Mass Air Flow Sensor Parts and Q&A

Mass Air Flow Sensor
22204-0F030
Q: How to install the Mass Air Flow Sensor on Toyota Sequoia?
A:
Install the mass air flow sensor onto the 2UZ-FE engine control by fastening it with 2 screws that require a torque of 1.7 Nm (17 kgf-cm, 15 in-lbf). Install the mass air flow sensor connector as the second step.
Mass Air Flow Sensor
22204-0F010
Q: How to effectively service and repair the Mass Air Flow Sensor on Toyota Sequoia?
A:
Service and repair of the Mass Air Flow (MAF) sensor should start with disconnecting the MAF sensor connector. First disconnect the MAF sensor connector followed by removing the MAF sensor through its 2 securing screws. Insert the MAF sensor after reinstalling it with its two mounting screws. Service and repair of the MAF sensor requires replacing the MAF sensor connector.

Related Toyota Sequoia Parts

Browse Toyota Sequoia Mass Air Flow Sensor by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001