How to remove the Cruise Control Module on Toyota Sequoia?

The Cruise Control Module removed with an initial step of taking out the front door scuff plate LH along with the cowl side trim board LH. The procedure begins with insertion of the front door opening trim Weather Strip LH. The instrument side panel LH should then be taken away. The technician should first remove the hood lock control lever sub-assembly and the lower instrument panel finish panel sub-assembly LH after removing those parts. The main body ECU (cowl side junction block LH) can be separated by first removing this No. 1 instrument panel safety pad insert. The last step involves disconnecting the connector while unbolted to extract the distance control ECU assembly.

OEM Toyota Sequoia Cruise Control Module

Cruise Control Module Speed Control

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Module found

View related parts
Toyota Sequoia Control Module
Part Number: 88240-34030
$709.26 MSRP: $1039.43
You Save: $330.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Distance Control; Cruise Control Module; Sonar Control Module
- Manufacturer Note: CRUISE CONTROL-WITH(LASER CRUISE)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

Toyota Sequoia Cruise Control Module

If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Cruise Control Module at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Sequoia Cruise Control Module Parts Questions & Experts Answers

Control Module
88240-34030
Q: How to remove the Cruise Control Module on Toyota Sequoia?
A: The Cruise Control Module removed with an initial step of taking out the front door scuff plate LH along with the cowl side trim board LH. The procedure begins with insertion of the front door opening trim Weather Strip LH. The instrument side panel LH should then be taken away. The technician should first remove the hood lock control lever sub-assembly and the lower instrument panel finish panel sub-assembly LH after removing those parts. The main body ECU (cowl side junction block LH) can be separated by first removing this No. 1 instrument panel safety pad insert. The last step involves disconnecting the connector while unbolted to extract the distance control ECU assembly.