How to replace the cruise control servo on Toyota Highlander?

To replace the cruise control servo, remove the actuator cover, loosen the double nut for the accelerator control cable (2AZ-FE), and remove the screw for the auto drive cable. For the 1MZ-FE, remove the cruise control cable screw, then disconnect the connector and remove the actuator assembly.

How to Service and Repair the Cruise Control Servo on Toyota Highlander?

In order to replace Cruise Control Actuator Assembly, detach the actuator cover by disconnecting the 2 claws. In the case of 2AZ-FE engine, it is necessary to loosen the 2AZ-FE engine double nut to part the accelerator control cable, screw on the auto drive cable, connector and loosen 3 nuts to remove the assembly.

OEM Toyota Highlander Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Servos found

View related parts
Toyota Highlander Actuator Assembly
Part Number: 88200-48030
Product Specifications
- Other Name: Actuator Assembly, Cruise Control; Cruise Control Actuator; Cruise Control Servo; Actuator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Actuator Assembly
Part Number: 88200-48020
Product Specifications
- Other Name: Actuator Assembly, Cruise Control; Cruise Control Actuator; Cruise Control Servo; Actuator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 6 Cyl 3.0 L GAS

Toyota Highlander Cruise Control Servo

If you're thinking about purchasing OEM parts for your Toyota Highlander, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander Cruise Control Servo at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Highlander Cruise Control Servo Parts and Q&A

Actuator Assembly
88200-48020
Q: How to replace the cruise control servo on Toyota Highlander?
A: To replace the cruise control servo, remove the actuator cover, loosen the double nut for the accelerator control cable (2AZ-FE), and remove the screw for the auto drive cable. For the 1MZ-FE, remove the cruise control cable screw, then disconnect the connector and remove the actuator assembly.
Actuator Assembly
88200-48030
Q: How to Service and Repair the Cruise Control Servo on Toyota Highlander?
A: In order to replace Cruise Control Actuator Assembly, detach the actuator cover by disconnecting the 2 claws. In the case of 2AZ-FE engine, it is necessary to loosen the 2AZ-FE engine double nut to part the accelerator control cable, screw on the auto drive cable, connector and loosen 3 nuts to remove the assembly.