How do you replace the Alternator Bearing on Toyota Highlander?

The first step to replace the generator drive end frame bearing requires removal of the 4 screws along with the retainer plate from the drive end frame. The drive end frame bearing removal will be accomplished through the use of Special Service Tools 09950-60010 and 09951-00250 together with a hammer device for tapping out the bearing from the frame. For installation of the new generator drive end frame bearing use Special Service Tools: 09950-60010 09951-00470 and a press. Finally install the retainer plate by placing its tabs into the drive end frame cutouts and fasten it with 4 screws using 2.3 Nm (23 kgf-cm, 20 in-lbf) torque.

OEM Toyota Highlander Alternator Bearing

Alternator Pulley Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Alternator Bearing found

View related parts
Toyota Highlander Front Bearing
Part Number: 90068-10033
$17.90 MSRP: $24.92
You Save: $7.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Alternator Bearing; Bearings; Bearing(For Alternator Drive End Frame); Bearing(For Alternator Rotor)
- Replaces: 90099-10223
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Highlander Alternator Bearing

If you're thinking about purchasing OEM parts for your Toyota Highlander, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander Alternator Bearing at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Highlander Alternator Bearing Parts Questions & Experts Answers

Front Bearing
90068-10033
Q: How do you replace the Alternator Bearing on Toyota Highlander?
A: The first step to replace the generator drive end frame bearing requires removal of the 4 screws along with the retainer plate from the drive end frame. The drive end frame bearing removal will be accomplished through the use of Special Service Tools 09950-60010 and 09951-00250 together with a hammer device for tapping out the bearing from the frame. For installation of the new generator drive end frame bearing use Special Service Tools: 09950-60010 09951-00470 and a press. Finally install the retainer plate by placing its tabs into the drive end frame cutouts and fasten it with 4 screws using 2.3 Nm (23 kgf-cm, 20 in-lbf) torque.