How to remove and replace the radiator on Toyota Corolla?

Start radiator replacement by draining engine coolant. After draining engine coolant start by disconnecting the inlet and outlet hoses of the radiator. Users must disconnect Oil cooler input hose No.1 together with Oil cooler output hose No.1 from the automatic transaxle system. The methodology starts with disconnecting the fan motor connector before moving on to remove the two wire-harness clamps from the fan shroud and taking out the fan with motor by unscrewing its mount bolts.

How to install the radiator on Toyota Corolla?

A procedure to mount the radiator begins with securing the fan shroud to the radiator assembly through 2 bolts that need a torque setting of 7.0 Nm (71 kgf-cm, 62 in-lbf). Start by fitting the oil cooler hose with 2 bolts and torquing them to 5.5 Nm (56 kgf-cm, 49 in-lbf) before joining the radiator to the oil cooler hoses. After attaching the radiator assembly with fan shroud fit the 2 lower supports while avoiding forceful application on the cooler condenser assembly and pipe. Attach both sides of the cooling fan ECU connector along with the wire harness clamp assembly. Use the 2 claws to install the No. 2 fan shroud to the radiator assembly while tightening 2 bolts to 7.0 Nm (71 kgf-cm, 62 in-lbf). The upper radiator support sub-assembly requires 4 bolts installed with 5.5 Nm (56 kgf-cm, 49 in-lbf) torque while a horn connector should get connected at the same time. Install the hood lock support sub-assembly by using 2 bolts which should be torqued to 7.0 Nm (71 kgf-cm, 62 in-lbf). Apply 3 clamps to secure the water by-pass hose before attaching it to the radiator assembly through a clamp. The hood lock assembly should be installed followed by attaching 2 radiator support cushions to upper radiator supports and tightening 2 bolts at 19 Nm (194 kgf-cm, 14 ft-lbf). The radiator assembly receives the No. 2 radiator hose and No. 1 radiator hose and radiator reservoir tank hose through clamping connections. After installing the thermistor assembly you should put on the front bumper assembly and radiator grille protector. After battery installation the technician will perform coolant addition and investigate any radiator fluid leakage. Windshield wiper assemblies should be inspected for damage and contamination before starting the fog light aiming adjustment process. Any needed adjustments will determine the next steps for the technician.

OEM Toyota Corolla Radiator

Cooling Radiator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Radiators found

View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-37311
$233.80 MSRP: $333.82
You Save: $100.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Replaces: 16400-37310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020 Toyota Corolla | Hybrid LE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-24320
$240.83 MSRP: $343.85
You Save: $103.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019 Toyota Corolla | SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-0D230
$261.25 MSRP: $373.00
You Save: $111.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Replaces: 16410-0D230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-22160
$276.76 MSRP: $395.14
You Save: $118.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Corolla | Base, L, LE, S, XLE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-AZ007
$92.04 MSRP: $128.98
You Save: $36.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2002 Toyota Corolla | CE, LE, S, VE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-24380
$252.56 MSRP: $360.60
You Save: $108.04 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | FX, LE, Nightshade, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-AZ009
$125.30 MSRP: $177.10
You Save: $51.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Corolla | Base, L, LE, S, XLE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-0T031
$251.40 MSRP: $358.93
You Save: $107.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Manufacturer Note: AIR CONDITIONER-MANUAL A/C
- Replaces: 16410-0T030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2017 Toyota Corolla | 50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-37380
$198.02 MSRP: $282.72
You Save: $84.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | Hybrid LE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-0T043
$226.06 MSRP: $322.75
You Save: $96.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Corolla | 50th Anniversary Special Edition, L, LE, LE Eco, SE, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-0T042
$226.76 MSRP: $323.75
You Save: $96.99 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Replaces: 16410-0T041, 16410-0T040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2017 Toyota Corolla | 50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-0T390
$233.80 MSRP: $333.82
You Save: $100.02 (30%)
ADD TO CART
Product Specifications
- Other Name: Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | L, LE, XLE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Part Number: 16400-37410
$236.25 MSRP: $337.32
You Save: $101.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020 Toyota Corolla | Hybrid LE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-F2180
$238.96 MSRP: $341.19
You Save: $102.23 (30%)
ADD TO CART
Product Specifications
- Other Name: Radiator
- Manufacturer Note: MARK=F218
- Replaces: 16400-24390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | Hybrid LE, Hybrid Nightshade, Hybrid SE, Hybrid XLE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-24340
$241.54 MSRP: $344.86
You Save: $103.32 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | SE, SE Nightshade, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-F2010
$243.24 MSRP: $347.29
You Save: $104.05 (30%)
ADD TO CART
Product Specifications
- Other Name: Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | SE, SE Apex, SE Nightshade, XSE, XSE Apex | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-37400
$251.28 MSRP: $358.77
You Save: $107.49 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator
- Replaces: 16400-37340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | L, LE, XLE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16400-F2081
$252.56 MSRP: $360.60
You Save: $108.04 (30%)
ADD TO CART
Product Specifications
- Other Name: Radiator
- Replaces: 16400-F2080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | FX, LE, Nightshade, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-0H260
$347.88 MSRP: $496.69
You Save: $148.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Corolla | XRS | 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Radiator Assembly Part Number: 16410-0H250
Product Specifications
- Other Name: Radiator Assembly, L/Cap; Radiator
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Corolla | XRS | 4 Cyl 2.4 L GAS

| Page 1 of 3 |Next >

1-20 of 43 Results

Toyota Corolla Radiator

Choose genuine Radiator that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Radiator for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Corolla Radiator is a major part of the car's area with a network of pipes as well as shiny metal sheets termed as fins. Locally known as the 'hot box', the radiator is placed between the engine and grille using the cooling fan and airflow from the moving car to cool hot liquid known as the coolant. Since different models of Corolla may have radiators with difference number of cores, it can be expected that bigger number of cores will produce more space for heat transfer. If one of these indicators is observed it may mean that the radiator is already damaged and includes rusting, leaking of coolant and over heating of the engine which is very dangerous to the engine. Thus, preventive maintenance and in particular, the timely change of a damaged radiator is critical when it comes to the cooling system in the Toyota Corolla car model.

Toyota Corolla Radiator Parts and Q&A

Radiator Assembly
16400-0D230
Q: How to remove and replace the radiator on Toyota Corolla?
A:
Start radiator replacement by draining engine coolant. After draining engine coolant start by disconnecting the inlet and outlet hoses of the radiator. Users must disconnect Oil cooler input hose No.1 together with Oil cooler output hose No.1 from the automatic transaxle system. The methodology starts with disconnecting the fan motor connector before moving on to remove the two wire-harness clamps from the fan shroud and taking out the fan with motor by unscrewing its mount bolts.
Radiator Assembly
16410-0H250
Q: How to install the radiator on Toyota Corolla?
A:
A procedure to mount the radiator begins with securing the fan shroud to the radiator assembly through 2 bolts that need a torque setting of 7.0 Nm (71 kgf-cm, 62 in-lbf). Start by fitting the oil cooler hose with 2 bolts and torquing them to 5.5 Nm (56 kgf-cm, 49 in-lbf) before joining the radiator to the oil cooler hoses. After attaching the radiator assembly with fan shroud fit the 2 lower supports while avoiding forceful application on the cooler condenser assembly and pipe. Attach both sides of the cooling fan ECU connector along with the wire harness clamp assembly. Use the 2 claws to install the No. 2 fan shroud to the radiator assembly while tightening 2 bolts to 7.0 Nm (71 kgf-cm, 62 in-lbf). The upper radiator support sub-assembly requires 4 bolts installed with 5.5 Nm (56 kgf-cm, 49 in-lbf) torque while a horn connector should get connected at the same time. Install the hood lock support sub-assembly by using 2 bolts which should be torqued to 7.0 Nm (71 kgf-cm, 62 in-lbf). Apply 3 clamps to secure the water by-pass hose before attaching it to the radiator assembly through a clamp. The hood lock assembly should be installed followed by attaching 2 radiator support cushions to upper radiator supports and tightening 2 bolts at 19 Nm (194 kgf-cm, 14 ft-lbf). The radiator assembly receives the No. 2 radiator hose and No. 1 radiator hose and radiator reservoir tank hose through clamping connections. After installing the thermistor assembly you should put on the front bumper assembly and radiator grille protector. After battery installation the technician will perform coolant addition and investigate any radiator fluid leakage. Windshield wiper assemblies should be inspected for damage and contamination before starting the fog light aiming adjustment process. Any needed adjustments will determine the next steps for the technician.