How to remove the Vapor Pressure Sensor on Toyota Camry?

First step to remove the Fuel Tank Pressure Sensor involves removing the Fuel Tank Cap Assembly. The first step involves removing the Rear Seat Cushion Assembly and then proceeding with taking off the Rear Floor Service Hole Cover. The procedure starts with disconnecting the Vapor Pressure Sensor Assembly connector and proceeding to remove the cover and tube joint clip before pulling out the vapor pressure sensor. Start the operation only when you verify that the connector area is clear of all foreign substances including dirt and if needed you should clean it to maintain the O-ring seal integrity. When working on this step you should not employ any tools and in case the fuel suction plate or vapor pressure sensor are difficult to remove you should apply gentle motions to free them but maintain a cautious approach to remove them from the suction plate.

OEM Toyota Camry Vapor Pressure Sensor

Fuel Vapor Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vapor Pressure Sensors found

View related parts
Toyota Camry Pressure Relief Valve
Part Number: 89461-48020
$196.06 MSRP: $279.93
You Save: $83.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Vapor Pressure; Fuel Tank Pressure Sensor; Fuel Injection Pressure Sensor; Fuel Pressure Sensor; Pressure Sensor; Vent Tube; Tank Pressure Sensor; Sensor Assembly, Vapor Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2024, 2007-2011 Toyota Camry | Hybrid, Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Camry Pressure Sensor
Part Number: 89461-33020
$259.20 MSRP: $370.08
You Save: $110.88 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Vapor Pressure; Tank Pressure Sensor; Pressure Feedback Sensor; Sensor Assembly, Vapor Pressure
- Replaces: 89461-02030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
Toyota Camry Pressure Sensor
Part Number: 89461-0C010
$272.49 MSRP: $389.06
You Save: $116.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Vapor Pressure; Evaporative Emissions; Fuel Tank; Fuel Injection; EGR Pressure; Tank Pressure Sensor; Vapor Valve; Pressure Feedback Sensor; Sensor; Sensor Assembly, Vapor Pressure
- Replaces: 89461-20010, 89461-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Pressure Feedback Sensor
Part Number: 89461-06040
$268.17 MSRP: $382.89
You Save: $114.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Vapor Pressure; Sensor Assembly, Vapor Pressure
- Manufacturer Note: CALIFORNIA SPEC
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS

Toyota Camry Vapor Pressure Sensor

If you're thinking about purchasing OEM parts for your Toyota Camry, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry Vapor Pressure Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Camry Vapor Pressure Sensor Parts Questions & Experts Answers

Pressure Relief Valve
89461-48020
Q: How to remove the Vapor Pressure Sensor on Toyota Camry?
A: First step to remove the Fuel Tank Pressure Sensor involves removing the Fuel Tank Cap Assembly. The first step involves removing the Rear Seat Cushion Assembly and then proceeding with taking off the Rear Floor Service Hole Cover. The procedure starts with disconnecting the Vapor Pressure Sensor Assembly connector and proceeding to remove the cover and tube joint clip before pulling out the vapor pressure sensor. Start the operation only when you verify that the connector area is clear of all foreign substances including dirt and if needed you should clean it to maintain the O-ring seal integrity. When working on this step you should not employ any tools and in case the fuel suction plate or vapor pressure sensor are difficult to remove you should apply gentle motions to free them but maintain a cautious approach to remove them from the suction plate.