My Garage
Cart

OEM Scion xA Wiper Linkage

Wiper Blade
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Linkage found

  • Scion xA Wiper Linkage - 85150-52190
    Scion xA Wiper Linkage Diagram - 85150-52190
    View related parts

    Scion xA Wiper Transmission, Front

    Part Number: 85150-52190
    $185.67 MSRP: $265.09
    You Save: $79.42 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Link Assembly, Front Wiper; Windshield Wiper Linkage; Linkage Assembly; Link Assembly, Windshield Wiper; Wiper Linkage
    • Position: Front
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following Vehicles:
    • 2004-2006 Scion xA | Base | 4 Cyl 1.5 L GAS

Scion xA Wiper Linkage

If you're thinking about purchasing OEM parts for your Scion xA, our website is your one-stop destination. We stock an extensive selection of genuine Scion xA Wiper Linkage at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xA Wiper Linkage Parts Questions & Experts Answers

  • Q: How to service and repair the Wiper Linkage on Scion xA?
    A: The Wiper Motor linkage repair and servicing process starts by disconnecting the negative battery cable terminal for at least 90 seconds to avoid activating Air Bags and seat belt pretensioners. Function the wiper to reach the automatic stop position and then detach the front wiper arm head cap followed by both left and right wiper arm and blade assemblies. The removal of the hood to cowl top seal requires a clip remover to detach its 8 clips and associated seal. Both left and right side cowl top ventilator louvers require unfastening their clips and bolts and detaching their five claws. Detach the windshield wiper motor while disconnecting its connector then removing two bolts followed by sliding the wiper link toward the passenger side to free the rubber pin. Start by detaching the windshield wiper motor assembly with a screwdriver which removes the meshing of the 2 rods at the crank arm pivot followed by "torx" bolt removal. Install the windshield wiper motor assembly onto the wiper link by tightening two "torx" screws to 7.5 N.m (76 kgf.cm, 66 in.lbf) neither losing nor gaining a pre-established tolerance. After application of grease to the crank arm pivot, insert both rods. Installing the windshield wiper motor and its link component requires applying 5.4 N.m of torque (55 kgf.cm, 47 in.lbf) to 2 bolts. Finally, resume the connector. Both sides of the cowl top ventilator louvers need five claws to attach for bolt and clip installation. After fitting the 8 clips to attach the hood to cowl top seal you must install the front wiper assemblies on both sides while scratching off the wiper arm serrations and wiping clean the wiper pivot prior to torquing the retaining nut to 26 N.m (265 kgf.cm, 19 ft.lbf). After reconnecting the battery negative cable you must perform initialization because selected systems need this process.

Related Scion xA Parts