How to remove the parking brake cable on 2010 Toyota Camry?

The first step to remove the parking brake cable should begin with isolating the LH front seat assembly after which you must remove the RH front seat assembly along with both manual and power seats by following identical procedures for each side. The removal process for both the parking brake pedal assembly starts with TMC and TMMK made vehicles. Both TMC and TMMK made vehicles require the removal of their No. 1 parking brake cable assembly. The next step involves the removal of front and rear door opening trim Weather Strips together with rear door scuff plates on both sides before moving to lower center pillar garnish removal. The luggage door lock opener assembly needs to be removed by first unscrewing it and then disengaging the claw. The front floor carpet assembly needs clamps and claws removal for access to the bolts that secure the cross member No. 4 floor reinforcement sub-assembly which should be removed next. To orient a future replacement, route No. 3 and No. 2 parking brake cables from the parking brake equalizer before individually extracting No. 4 parking brake cables by sliding rubber boots from the equalizer. Disassemble the center exhaust pipe assembly while you also detach both floor under covers before you extract the No. 2 front floor heat lower insulator because of its nuts. Remove the rear wheel then disconnect the rear disc brake caliper assembly together with the rear disc. The technician should remove the parking brake shoe return tension No. 1 spring and parking brake shoe strut while taking out both No. 1 and No. 2 parking brake shoe assemblies. To detach the No. 3 parking brake cable assembly you must first separate it from the backing plate while using needle-nose pliers to remove the clip and loosening the required bolts and nuts until you can remove the cable and parking brake cable clamp together.

OEM 2010 Toyota Camry Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Parking Brake Cables found

View related parts
2010 Toyota Camry Rear Cable
Part Number: 46430-06160
$84.83 MSRP: $119.08
You Save: $34.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46430
- Item Weight: 2.30 Pounds
- Item Dimensions: 18.1 x 13.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-06160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Rear Cable
Part Number: 46430-06090
$84.00 MSRP: $117.91
You Save: $33.91 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-33140
- Part Name Code: 46430
- Item Weight: 2.40 Pounds
- Item Dimensions: 17.6 x 12.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Rear Cable
Part Number: 46420-06160
$84.00 MSRP: $117.91
You Save: $33.91 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.5 x 12.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-06160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Rear Cable
Part Number: 46420-06090
$70.38 MSRP: $98.79
You Save: $28.41 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-33140
- Part Name Code: 46420
- Item Weight: 2.60 Pounds
- Item Dimensions: 16.8 x 12.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-06090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Front Cable
Part Number: 46410-33150
$35.12 MSRP: $48.89
You Save: $13.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 16.0 x 11.5 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-33150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Front Cable
Part Number: 46410-06070
$73.46 MSRP: $103.11
You Save: $29.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: (L)
- Replaces: 46410-33170
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 16.5 x 12.2 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Camry Rear Cable
Part Number: 46420-06180
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.3 x 12.6 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-06180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2010 Toyota Camry Parking Brake Cable

Looking for affordable OEM 2010 Toyota Camry Parking Brake Cable? Explore our comprehensive catalogue of genuine 2010 Toyota Camry Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Camry Parts Questions & Experts Answers

Q: How to remove the parking brake cable on 2010 Toyota Camry?
A: The first step to remove the parking brake cable should begin with isolating the LH front seat assembly after which you must remove the RH front seat assembly along with both manual and power seats by following identical procedures for each side. The removal process for both the parking brake pedal assembly starts with TMC and TMMK made vehicles. Both TMC and TMMK made vehicles require the removal of their No. 1 parking brake cable assembly. The next step involves the removal of front and rear door opening trim Weather Strips together with rear door scuff plates on both sides before moving to lower center pillar garnish removal. The luggage door lock opener assembly needs to be removed by first unscrewing it and then disengaging the claw. The front floor carpet assembly needs clamps and claws removal for access to the bolts that secure the cross member No. 4 floor reinforcement sub-assembly which should be removed next. To orient a future replacement, route No. 3 and No. 2 parking brake cables from the parking brake equalizer before individually extracting No. 4 parking brake cables by sliding rubber boots from the equalizer. Disassemble the center exhaust pipe assembly while you also detach both floor under covers before you extract the No. 2 front floor heat lower insulator because of its nuts. Remove the rear wheel then disconnect the rear disc brake caliper assembly together with the rear disc. The technician should remove the parking brake shoe return tension No. 1 spring and parking brake shoe strut while taking out both No. 1 and No. 2 parking brake shoe assemblies. To detach the No. 3 parking brake cable assembly you must first separate it from the backing plate while using needle-nose pliers to remove the clip and loosening the required bolts and nuts until you can remove the cable and parking brake cable clamp together.