How to install the heated oxygen sensor for Bank 1 Sensor 2 on 2010 Scion tC?

For installing the heated oxygen sensor for Bank 1 Sensor 2 on the 2AZ-FE emission control system users must first install the sensor onto the front exhaust pipe by applying 40 Nm (408 kgf-cm, 30 ft-lbf) torque that requires Special Service Tool: 09224-00010 or 44 Nm (449 kgf-cm, 32 ft-lbf) without the tool. A torque wrench with a 30 cm (11.81 in.) fulcrum length should be used for this installation task. Next, connect the sensor connector. Before reconnecting, note that the system might need an initialization process despite connecting the negative battery terminal with the available cable. An inspection for exhaust gas leaks must be done as the last step.

OEM 2010 Scion tC Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2010 Scion tC Oxygen Sensor, Front
Part Number: 89467-06030
$195.94 MSRP: $279.76
You Save: $83.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Fuel Rat; Oxygen Sensor, Front; Sensor; Sensor, Air Fuel Ratio
- Position: Front
- Replaces: 89467-33080
- Part Name Code: 89467B
- Item Weight: 0.80 Pounds
- Item Dimensions: 14.4 x 12.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89467-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2010 Scion tC Oxygen Sensor, Rear
Part Number: 89465-21070
$99.53 MSRP: $139.70
You Save: $40.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Oxygen; Oxygen Sensor, Rear
- Position: Rear
- Part Name Code: 89465
- Item Weight: 2.70 Pounds
- Item Dimensions: 7.4 x 3.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89465-21070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Oxygen Sensor

Looking for affordable OEM 2010 Scion tC Oxygen Sensor? Explore our comprehensive catalogue of genuine 2010 Scion tC Oxygen Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Oxygen Sensor Parts Q&A

Q: How to install the heated oxygen sensor for Bank 1 Sensor 2 on 2010 Scion tC?
A: For installing the heated oxygen sensor for Bank 1 Sensor 2 on the 2AZ-FE emission control system users must first install the sensor onto the front exhaust pipe by applying 40 Nm (408 kgf-cm, 30 ft-lbf) torque that requires Special Service Tool: 09224-00010 or 44 Nm (449 kgf-cm, 32 ft-lbf) without the tool. A torque wrench with a 30 cm (11.81 in.) fulcrum length should be used for this installation task. Next, connect the sensor connector. Before reconnecting, note that the system might need an initialization process despite connecting the negative battery terminal with the available cable. An inspection for exhaust gas leaks must be done as the last step.