How do you install the ignition coil assembly for the 2AZ-FE engine on 2010 Scion tC?

When replacing the ignition coil assembly for the 2AZ-FE engine, users need to bolt down the 4 ignition coils with 4 hardware pieces and tighten each one to 9.0 Nm (90 kgf-cm, 80 in-lbf). You should then join all 4 ignition coil connectors. Afterward, install the engine cover. Place the cover on the engine after which connect the cable to the negative terminal of the battery. The final requirement involves performing initialization steps which become necessary when disconnecting and reconnecting the cable to the negative (-) battery terminal.

OEM 2010 Scion tC Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2010 Scion tC Ignition Coil
Part Number: 90919-02266
$92.77 MSRP: $130.23
You Save: $37.46 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Direct Ignition Coil OE Quality; Coil; Coil Assembly, Ignition
- Replaces: 90919-02244, 90080-19023, 90919-02243
- Part Name Code: 19500
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.6 x 7.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 90919-02266
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Ignition Coil

Looking for affordable OEM 2010 Scion tC Ignition Coil? Explore our comprehensive catalogue of genuine 2010 Scion tC Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How do you install the ignition coil assembly for the 2AZ-FE engine on 2010 Scion tC?
A: When replacing the ignition coil assembly for the 2AZ-FE engine, users need to bolt down the 4 ignition coils with 4 hardware pieces and tighten each one to 9.0 Nm (90 kgf-cm, 80 in-lbf). You should then join all 4 ignition coil connectors. Afterward, install the engine cover. Place the cover on the engine after which connect the cable to the negative terminal of the battery. The final requirement involves performing initialization steps which become necessary when disconnecting and reconnecting the cable to the negative (-) battery terminal.

Related 2010 Scion tC Parts

Alternate Year Models

2009 Scion tC Ignition Coil 2011 Scion tC Ignition Coil