How to install the Yaw Sensor and perform the necessary calibrations on 2009 Toyota Avalon?

Begin by mounting the Yaw Rate Sensor with two bolts at 14 Nm (143 kgf-cm, 10 ft-lbf) and join the yaw rate sensor connector afterward. First put in the console box assembly before you add the console upper rear panel sub-assembly. Join the cable to the negative battery end while bearing in mind that system setup could be needed following this reconnect. Check that the yaw rate sensor performs zero-point calibration before viewing if your ABS and VSC dashboard lights work well.

OEM 2009 Toyota Avalon Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2009 Toyota Avalon Yaw Rate Sensor, Front
Part Number: 89183-60020
$297.93 MSRP: $365.37
You Save: $67.44 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Yawrate; Suspension Yaw Sensor, Front; Yaw Sensor; Sensor
- Position: Front
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.7 x 4.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89183-60020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS

2009 Toyota Avalon Yaw Sensor

Looking for affordable OEM 2009 Toyota Avalon Yaw Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Avalon Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Avalon Yaw Sensor Parts Q&A

Q: How to install the Yaw Sensor and perform the necessary calibrations on 2009 Toyota Avalon?
A: Begin by mounting the Yaw Rate Sensor with two bolts at 14 Nm (143 kgf-cm, 10 ft-lbf) and join the yaw rate sensor connector afterward. First put in the console box assembly before you add the console upper rear panel sub-assembly. Join the cable to the negative battery end while bearing in mind that system setup could be needed following this reconnect. Check that the yaw rate sensor performs zero-point calibration before viewing if your ABS and VSC dashboard lights work well.