OEM 2009 Scion tC Antenna Cable

2009 Scion tC Antenna Cable Parts Q&A

• Q: How to install the antenna cable sub-assembly and related components on 2009 Scion tC?

  A: The antenna cord sub-assembly installation requires the connection of all clamps followed by bolt installation. Continue by installing the instrumental cluster finish panel then the rear console box assembly and finally the console upper rear panel sub-assembly and upper console panel. The shift lever knob sub-assembly must be installed on vehicles with manual transaxle transmission. Start by putting on the deck trim side panel assembly RH followed by the No. 2 luggage compartment trim hook and the No. 1 side trim assembly RH before you move on to the No. 1 luggage compartment trim hook and the front door scuff plate RH and the front seat outer belt assembly RH installation. The installation includes the lap belt outer anchor cover combined with the rear seatback assembly RH and rear seat cushion assembly and front seat assembly. The next sequence involves installation of the seat track bracket cover inner RH followed by the seat track bracket cover outer RH, then the rear No. 1 floor board and rope hook assembly before working on the deck floor box RH and deck floor box LH. Back door scuff plate installation will be followed by assembly of the deck board sub-assembly and tonneau cover assembly. The final step requires connection of the cable to the negative terminal while performing initialization since several systems need this procedure after disconnecting and reconnecting the cable to the negative (-) terminal.