Other Name: Weatherstrip Assembly, Front Door Glass; Door Window Belt Weatherstrip, Front Right; Weatherstrip Assembly, Front Door Glass, Outer Passenger Side; Weatherstrip
Position: Outer Passenger Side
Part Name Code: 68160C
Item Weight: 2.10 Pounds
Item Dimensions: 49.0 x 6.8 x 6.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68160-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Weatherstrip Assembly, Front Door Glass; Door Window Belt Weatherstrip, Front Left; Weatherstrip Assembly, Front Door Glass, Outer Driver Side; Weatherstrip
Position: Outer Driver Side
Part Name Code: 68210C
Item Weight: 1.40 Pounds
Item Dimensions: 39.1 x 6.3 x 6.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68210-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Weatherstrip, Rear Door; Sliding Door Weatherstrip, Left Inner; Weatherstrip, Rear Door Glass, Inner Driver Side
Position: Inner Driver Side
Part Name Code: 68174E
Item Weight: 0.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 68174-08020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 2 |Next >
1-20 of 25 Results
2008 Toyota Sienna Weather Strip
Looking for affordable OEM 2008 Toyota Sienna Weather Strip? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Weather Strip. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sienna Parts Questions & Experts Answers
Q: How to remove the front door window glass Weather Strip on 2008 Toyota Sienna?
A: You must begin by taking off the coverage from the lower frame bracket front door and removing the bezel plug from the inside front door handle before proceeding with the front door window glass Weather Strip removal process. The first step involves removing the front door armrest base panel assembly followed by detachment of the back frame plate. First, workers should remove the power window regulator master switch assembly and the front door trim board sub-assembly. After the outer rear view mirror assembly removal proceed. The removal process of the front door glass Weather Strip includes wrapping protective tape underneath it followed by using a screwdriver or moulding remover to detach the Weather Strip while taping the screwdriver tip ahead of use.