OEM 2007 Toyota Sienna Cruise Control Module

2007 Toyota Sienna Parts Questions & Experts Answers

• Q: How to service and repair the Cruise Control Module on 2007 Toyota Sienna?

  A: The Cruise Control Module servicing procedure begins with removing the glove compartment door stopper sub-assembly then proceeding to the glove compartment door assembly. Service and repair of the Cruise Control Module starts with removing the stereo component amplifier assembly (with stereo component amplifier) and distance control ECU assembly where you first loosen the bolt then detach the clip. The installation of the distance control ECU assembly requires a torque wrench to fasten the bolt with 5 N.m (51 kgf.cm, 44 in.lbf) torque but only after confirming that the ECU assembly suffered no drops or shocks during handling. The ECU initialization process starts when you turn the ignition to On position then activate the cruise main switch with the brake pedal engaged before pressing the cruise control main switch to RES/ACC three times within three seconds to hear the buzzer sound. The procedure should not involve activating the dimmer switch because incorrect optical axis settings can occur which must be corrected if the switch is accidentally turned on.