How to Service and Repair the Blower Motor Resistor on 2006 Toyota Sequoia?

Service and repair of the blower motor starts with glove compartment door removal followed by instrument panel lower finish panels No.2 and instrument lower cover and instrument panel lower finish panel LH. The service and repair on the blower motor starts with disconnection of the connector and removal of the screws holding the No.4 heater to register duct along with the blower motor controller. You should start with installing the blower motor linear controller through its 2 screws before reconnecting the connector. Proceed with reassembly by putting back the No.4 heater to register duct followed by the instrument panel lower finish panel LH and the instrument lower cover and the No.2 instrument panel lower finish panel and finishing with the glove compartment door assembly.

OEM 2006 Toyota Sequoia Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2006 Toyota Sequoia Transistor, Rear
Part Number: 88750-52010
$139.65 MSRP: $197.68
You Save: $58.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Transistor Assembly, Blower Resistor; HVAC Blower Motor Resistor, Rear; Resistor; Transistor Assembly, Blower Resistor(Rear); Blower Motor Resistor
- Position: Rear
- Part Name Code: 88750R
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 5.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88750-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Control, Blower Motor
Part Number: 87165-32010
$220.56 MSRP: $314.91
You Save: $94.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 87165-33010
- Part Name Code: 87165C
- Item Weight: 0.80 Pounds
- Item Dimensions: 15.8 x 11.6 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87165-32010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2006 Toyota Sequoia Blower Motor Resistor

Looking for affordable OEM 2006 Toyota Sequoia Blower Motor Resistor? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Blower Motor Resistor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: How to Service and Repair the Blower Motor Resistor on 2006 Toyota Sequoia?
A: Service and repair of the blower motor starts with glove compartment door removal followed by instrument panel lower finish panels No.2 and instrument lower cover and instrument panel lower finish panel LH. The service and repair on the blower motor starts with disconnection of the connector and removal of the screws holding the No.4 heater to register duct along with the blower motor controller. You should start with installing the blower motor linear controller through its 2 screws before reconnecting the connector. Proceed with reassembly by putting back the No.4 heater to register duct followed by the instrument panel lower finish panel LH and the instrument lower cover and the No.2 instrument panel lower finish panel and finishing with the glove compartment door assembly.