OEM 2006 Toyota Prius Wiper Switch

2006 Toyota Prius Parts Questions & Experts Answers

• Q: How to service the wiper switch on 2006 Toyota Prius?

  A: Service procedures for the wiper switch must begin with disconnecting the negative battery terminal cable then waiting 90 seconds to avoid Air Bag and seat belt pretensioner deployment. Service the wiper switch through an operation which includes removal of the No. 2 steering wheel cover lower, No. 3 steering wheel cover lower, steering pad assembly, steering wheel assembly, tilt lever bracket, and steering column cover. The wiper and washer switch assembly requires removal after disconnecting its connector and the claw extraction with caution against claw breakage. The installation process requires you to reattach the claw to install the wiper switch and connect the corresponding connector. The installation process includes fitting the steering column cover followed by the tilt lever bracket then the spiral cable sub-assembly alongside the steering wheel assembly after you install No. 2 steering wheel cover lower and No. 3 steering wheel cover lower and steering pad assembly. After finishing the battery connection to the negative terminal users should inspect the steering pad assembly followed by SRS warning light evaluation then run system initialization sequences for systems which need this step upon disconnecting and reconnecting the negative cable.