How to service and repair the Blend Door Actuator on 2004 Toyota RAV4?

The procedure for repairing the Air Inlet Servomotor starts with removing the blower unit. Start the servicing process by detaching the air inlet servomotor through the removal of its 3 screws. The installation of the air inlet servomotor requires positioning it correctly followed by screwing it into place with the 3 screws before reattaching the blower unit.

OEM 2004 Toyota RAV4 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2004 Toyota RAV4 Servo
Part Number: 87106-42050
Product Specifications
- Other Name: Servo Sub-Assembly, Damper; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; Servo Sub-Assembly, Damper(For Recirculation)
- Part Name Code: 87106N
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 4.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87106-42050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota RAV4 Submodels:
- Base, L, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2004 Toyota RAV4 Blend Door Actuator

Looking for affordable OEM 2004 Toyota RAV4 Blend Door Actuator? Explore our comprehensive catalogue of genuine 2004 Toyota RAV4 Blend Door Actuator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota RAV4 Parts Questions & Experts Answers

Q: How to service and repair the Blend Door Actuator on 2004 Toyota RAV4?
A: The procedure for repairing the Air Inlet Servomotor starts with removing the blower unit. Start the servicing process by detaching the air inlet servomotor through the removal of its 3 screws. The installation of the air inlet servomotor requires positioning it correctly followed by screwing it into place with the 3 screws before reattaching the blower unit.