OEM 2003 Toyota Prius Spoiler

2003 Toyota Prius Parts Questions & Experts Answers

• Q: How to remove and install a rear spoiler on 2003 Toyota Prius?

  A: The removal of the rear spoiler starts by unbolting its two fixings followed by body protection with tape. Heat the rear spoiler to between 40 to 60 degrees Celsius or 104 to 140 degrees Fahrenheit through the use of a heat light but avoid overheating it. Put the two ends of piano wire to wooden blocks or comparable items before you pull the wire to cut the tape. When repeating usage of the spoiler avoid damage to both components and their connections. The following step requires users to move on by removing both clips while taking away the rear spoiler from its position. The body mold requires heating to 40 - 60 degrees C (104 - 140 degrees F) using a heat light before removing the side protector and cleaning the surface with a suitable cleaner. To reuse the rear spoiler you should apply heat from a light source until it reaches 20 - 30 degrees C (68 - 86 degrees F) then remove the side protector and cleaning away all stains. Position fresh adhesive tapes on the rear spoiler before heating the body and rear spoiler to their required temperature points. attach the rear spoiler by using the two bolts then torque them to 5.0 N.m (51 kgf.cm, 44 in.lbf).