Other Name: Belt Assembly, Rear Seat, Outer Right; Seat Belt Lap and Shoulder Belt, Rear Left, Rear Right; Retractor Assembly; Rear Seat 3 Point Type Belt Assemblies for Outer Passenger and Driver Side.
Position: Rear Outer Passenger Side
Item Weight: 3.30 Pounds
Item Dimensions: 12.0 x 10.8 x 8.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-20821-C1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt Assembly, Front Seat Outer, Passenger Side
Position: Passenger Side
Part Name Code: 73210
Item Weight: 4.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73210-2B161-C3
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
Position: Passenger Side
Part Name Code: 73230
Item Weight: 1.50 Pounds
Item Dimensions: 13.9 x 11.1 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73230-20771-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Celica Submodels:
GT, GTS | 4 Cyl 1.8 L GAS
2003 Toyota Celica Seat Belt
Looking for affordable OEM 2003 Toyota Celica Seat Belt? Explore our comprehensive catalogue of genuine 2003 Toyota Celica Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota Celica Parts Questions & Experts Answers
Q: What are the essential steps to inspect and repair the seat belt system after a collision on 2003 Toyota Celica?
A: A thorough examination and repair of seat belts becomes essential after any collision takes place. A seat belt assembly that faces major impact should be replaced including the outer belt and inner belt together with bolts and nuts and sill-bar even if no apparent damage shows. When inspecting the pretensioner system one should conduct diagnostic checks before inspecting the quarter trim panel for cuts or marked discolorations and wire harness and connector damage as well as testing for quarter panel deflections. When the pretensioner activates performance a diagnostic system check and check for quarter panel deformation while also inspecting the connector and wire harness for damage. Installation of a new seat belt pretensioner becomes necessary in cases where the pretensioner activated or failed during testing or front seat belt performance issues exist or after seat belt falls from its position. The correct procedure must be followed during both removal and installation stages of seat belt pretensioner work.