How do you replace the A/C Accumulator on 2001 Toyota RAV4?

You must begin the dryer replacement process by using a 10 mm hexagon wrench to remove the modulator cap then extracting the filter. Put the new dryer inside the modulator through pliers handling while keeping the dryer inside its vinyl bag until the installation time which requires the 2 layered part to face upward. Add the filter into the modulator by placing it with the protrusion pointing down and then replace the cap. Use a 10 mm hexagon wrench to install the caps on the modulator while applying ND-OIL 8 or equivalent to the O-rings and screw part. Tighten the caps to 12.3 N.m (125 kg.cm, 9 ft.lb) torque.

OEM 2001 Toyota RAV4 A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

View related parts
2001 Toyota RAV4 Dehydrator
Part Number: 88474-47010
$72.83 MSRP: $102.24
You Save: $29.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Dryer, Cooler; A/C Receiver Drier; Drier Desiccant Element; Dryer, Air Conditioning; A/C Accumulator; Accumulator; Drier
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.9 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88474-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota RAV4 Submodels:
- Base | 4 Cyl 2.0 L GAS

2001 Toyota RAV4 A/C Accumulator

Looking for affordable OEM 2001 Toyota RAV4 A/C Accumulator? Explore our comprehensive catalogue of genuine 2001 Toyota RAV4 A/C Accumulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota RAV4 Parts Questions & Experts Answers

Q: How do you replace the A/C Accumulator on 2001 Toyota RAV4?
A: You must begin the dryer replacement process by using a 10 mm hexagon wrench to remove the modulator cap then extracting the filter. Put the new dryer inside the modulator through pliers handling while keeping the dryer inside its vinyl bag until the installation time which requires the 2 layered part to face upward. Add the filter into the modulator by placing it with the protrusion pointing down and then replace the cap. Use a 10 mm hexagon wrench to install the caps on the modulator while applying ND-OIL 8 or equivalent to the O-rings and screw part. Tighten the caps to 12.3 N.m (125 kg.cm, 9 ft.lb) torque.