OEM Toyota part with Part Number 85241-0D100 Wiper Arm, Rear known as Toyota Windshield Wiper, Wiper Arm component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 85241-0D100 Wiper Arm, Rear enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2014-2018 Toyota Yaris.
Genuine Toyota offers this high-quality Arm, Rear Wiper; Back Glass Wiper Arm under manufacturer part number 85241-0D100 for use in the Rear. This product identification code consists of 85241A which proves its manufacturer as Toyota. This component weighs 0.80 Pounds. This component 852410D100 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. This product is also known as Rear Arm. Each vehicle requires the component which has an identified SKU of 85241-0D100. Additional notes include REAR WINDOW WIPER-WITHOUT. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 85241-0D100. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
The Toyota part 85241-0D100 Wiper Arm, Rear is necessary to ensure that the vehicle has the proper functionality of the wiper phenomena in the vehicle in order to have the optimal visibility during unfavorable weather conditions. In order to remove the Toyota part 85241-0D100 Wiper Arm, Rear it is important to switch on the wiper motor and then make the arm come to its park position. After this, the wiper arm spindle nut cover is taken off and the nut removed to release the spindle and this can only be done by lifting the tailgate wiper arm cover to get a better access. In some cases where there is a tight fit of the wiper arm, one would use the flat-bladed screwdriver to carefully pry it open and ensure that it does not damage the other parts. To be reinstalled, the wiper arm and the splines must be clean and dry and correctly aligned to the wiper blade that is lying on the tape to be applied in the removal process. The spindle nut is to be firmly screwed over, and the nut cover renewed. Authentic Toyota parts containing 85241-0D100 are produced to high quality standards and offer excellent quality and fitment and are sold on our website in a manufacturer warranty, giving the customer satisfaction and confidence.