Toyota 85212-12470
Wiper Blade, Passenger Side

Begin the rear wiper blade removal process by opening the wiper arm head cap to raise the blade until the claw makes a ''click'' noise while you guard against disfiguring the claw mechanism. You should pull the wiper blade directly toward the left side of the vehicle to separate it from the arm while avoiding any folding of the wiper arm which could damage the back door glass surface. When addressing the rear wiper rubber you must lift one end from the blade stopper carefully to avoid damaging backing plates or blade claws; gentle pressure between rubber ends and middle helps remove it without trouble.

Push the wiper blade straight toward the right side of the vehicle to install it onto the wiper arm, taking care not to damage the claw.

Attach the 2 wiper rubber backing plates onto the wiper rubber, ensuring that the protrusions align with the notches in the backing plates and that the curves match the curve of the glass.

Lightly pushing the rubber between the ends and middle can facilitate easier removal.