OEM Toyota part with Part Number 48068-47050 Arm Sub-Assembly, Front Suspension, Lower Passenger Side known as Toyota Control Arm component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 48068-47050 Arm Sub-Assembly, Front Suspension, Lower Passenger Side enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2010-2015 Toyota Prius and 2012-2015 Toyota Prius Plug-In.
Genuine Toyota offers this high-quality Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm under manufacturer part number 48068-47050 for use in the Passenger Side. This product identification code consists of 48068 which proves its manufacturer as Toyota. This component features dimensions of 21.4 x 4.4 x 20.8 inches and weighs 12.70 Pounds. This component 4806847050 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. Each vehicle requires the component which has an identified SKU of 48068-47050. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 48068-47050. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
The Toyota part 48068-47050 Arm Sub-Assembly, Front Suspension, Lower Passenger Side serves as a vital system whose purpose is to support vehicle suspension operations and achieve peak handling together with improved ride quality. Routine checks must be conducted on this part because control arm distortion and bushing wear will result in immediate performance repercussions. The service procedures begin with rotating wheel lug nuts followed by activating the parking brake before allowing users to lift the vehicle through an assigned safe lifting point. Every damaged component can be thoroughly inspected after you disconnect the ball joint and detach the control arm from its subframe position. No bending activities on the control arm following retrieval should be avoided because this practice will compromise its structural stability. Installation demands following the removal procedure for repetition then requires total bolt tightening steps including special attention to the front pivot bolt as the final operation when the control arm achieves normal operating height. The Toyota part 48068-47050 Arm Sub-Assembly, Front Suspension, Lower Passenger Side meets rigorously-set standards to ensure prime performance together with enhanced system operational lifespan. Our website welcomes Toyota genuine parts in complete assortment and offers the Toyota 48068-47050 with manufacturer protection and effortless return options for customer fulfillment in all business operations.