How to remove the side Mud Flaps on the LH side on 2009 Scion tC?

The procedure to detach the LH side mudguard starts by removing the front LH rear wheel house plate through unscrewing its screw and plate. A sequential process begins with unfastening two screws followed by the removal of six retainers, two grommets, and six clips labeled A until the side mudguard sub-assembly LH can be detached. Finally, a complete removal is possible by detaching six clips marked B before taking off the mudguard. The No. 1 side mudguard bracket can be fully removed after unfastening the two screws and releasing the claw connector to detach the bracket.

OEM 2009 Scion tC Mud Flaps

Mud Flap Splash Guards

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mud Flaps found

View related parts
2009 Scion tC Mud Guard
Part Number: PT769-21040
$33.03 MSRP: $45.97
You Save: $12.94 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tc Mudguard Kit
- Item Weight: 1.70 Pounds
- Item Dimensions: 16.4 x 11.0 x 3.6 inches
- Condition: New
- SKU: PT769-21040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2009 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2009 Scion tC Mud Flaps

Looking for affordable OEM 2009 Scion tC Mud Flaps? Explore our comprehensive catalogue of genuine 2009 Scion tC Mud Flaps. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion tC Mud Flaps Parts Q&A

Q: How to remove the side Mud Flaps on the LH side on 2009 Scion tC?
A: The procedure to detach the LH side mudguard starts by removing the front LH rear wheel house plate through unscrewing its screw and plate. A sequential process begins with unfastening two screws followed by the removal of six retainers, two grommets, and six clips labeled A until the side mudguard sub-assembly LH can be detached. Finally, a complete removal is possible by detaching six clips marked B before taking off the mudguard. The No. 1 side mudguard bracket can be fully removed after unfastening the two screws and releasing the claw connector to detach the bracket.