How to install the Hazard Warning Switch on 2008 Toyota Prius?

The first step to install the Hazard Warning Switch entails setting up the switch assembly. After connecting the cable you must attach it to the negative battery terminal. Perform initialization after disconnecting then reconnecting the cable from the negative battery terminal since some systems need such procedures.

OEM 2008 Toyota Prius Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hazard Warning Switch found

View related parts
2008 Toyota Prius Hazard Switch
Part Number: 84330-47030
$101.50 MSRP: $142.47
You Save: $40.97 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Hazard; Hazard Warning Switch; Hazard Flasher Switch; Switch Assembly, Hazard Warning Signal
- Part Name Code: 84330
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.0 x 2.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84330-47030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Hazard Warning Switch

Looking for affordable OEM 2008 Toyota Prius Hazard Warning Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Hazard Warning Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Parts Questions & Experts Answers

Q: How to install the Hazard Warning Switch on 2008 Toyota Prius?
A: The first step to install the Hazard Warning Switch entails setting up the switch assembly. After connecting the cable you must attach it to the negative battery terminal. Perform initialization after disconnecting then reconnecting the cable from the negative battery terminal since some systems need such procedures.