How to service and repair the Trunk Lid Latch on 2008 Scion tC?

First service personnel should access the trunk/liftgate lock by removing the back door garnish center and then the back door side garnish LH and RH before taking out the back door trim board assembly. Complete the procedure by taking out the back door lock assembly. Installation follows the exact opposite order of the removal process while bolts without torque requirements can be found in the standard bolt chart under Specified Torque For Standard Bolts.

OEM 2008 Scion tC Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Latch found

View related parts
2008 Scion tC Lock Assembly, Rear
Part Number: 69350-21110
$215.63 MSRP: $307.87
You Save: $92.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch, Rear; Trunk Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Position: Rear
- Part Name Code: 69350P
- Item Weight: 1.60 Pounds
- Item Dimensions: 17.0 x 12.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69350-21110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2008 Scion tC Trunk Lid Latch

Looking for affordable OEM 2008 Scion tC Trunk Lid Latch? Explore our comprehensive catalogue of genuine 2008 Scion tC Trunk Lid Latch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion tC Parts Questions & Experts Answers

Q: How to service and repair the Trunk Lid Latch on 2008 Scion tC?
A: First service personnel should access the trunk/liftgate lock by removing the back door garnish center and then the back door side garnish LH and RH before taking out the back door trim board assembly. Complete the procedure by taking out the back door lock assembly. Installation follows the exact opposite order of the removal process while bolts without torque requirements can be found in the standard bolt chart under Specified Torque For Standard Bolts.